10mm with 231

[skosh69]

Originally Posted by sdmc530

but I have 11 pounds of 231

While I have no answer for your load data, I do have some donuts to trade for a few lbs of 231 if you're interested!

[douglas_knott]

You may have to wild cat the load using .40 s and w data what you're wanting to do. Or you can just sell me the 135's and then you don't need to worry about it. Or ill trade you some lead 180's for yours then you can make some sissy loads using your 231. I think I have data for those loads I can share and we can work out a good trade.

[sdmc530]

Originally Posted by douglas_knott

You may have to wild cat the load using .40 s and w data what you're wanting to do. Or you can just sell me the 135's and then you don't need to worry about it. Or ill trade you some lead 180's for yours then you can make some sissy loads using your 231. I think I have data for those loads I can share and we can work out a good trade.

Thanks, but I will keep the 135....I got 500 rounds for 50 bucks....it helps to be in LE sometimes. I found a guy who gave me some ideas but I may just sit on them untill I can get some other powder....will see, knowing me I will load em up and see what happens.

What could go wrong

[sdmc530]

Originally Posted by skosh69

While I have no answer for your load data, I do have some donuts to trade for a few lbs of 231 if you're interested!

Trade sure, but your deliviering te he he

[BadOscar]

I have used data from this site before:
http://stevespages.com/400p_3_135.html

Specifically I have run 7.1gr W231 with a Federal magnum primer 1.260 OAL with a Rainer 135 bullet