|
|
| Register | Forums | Blogs | Search | Today's Posts | Mark Forums Read | Donate |
 |
 |
 |
|
|
|
#1
09-18-2013, 05:17 PM
|
|||||
|
|||||
Nice Ron. Cabelas has usually got some online.
__________________
________________________ CBOB696 Lifetime NRA Member The biggest pain in the a** you'll probably ever have to deal with watches you from the mirror every morning. Good judgment comes from experience, and most of that comes from bad judgment. If you find yourself in a hole, the first thing to do is stop digging. 
|
|
#2
09-18-2013, 07:10 PM
|
|||||
|
|||||
|
Thanks guys!!!
I guess the bolt is wrong for a lefty!!! 
__________________
"This is the 44 Magnum AutoMag and holds a 300 grain cartridge and if properly used can remove the fingerprints"!! COTEP # CBOB0152
|
|
#3
09-30-2013, 03:43 PM
|
|||||
|
|||||
|
Well I was not happy with the color on the stock, it was actually almost a reddish color. I stripped the stock to bare wood and then applied Min Wax Dark Walnut. Maybe should have used an Oak color. For some reason it would not take the stain very well.
I once again stripped the stock to bare wood and repeated the process. As much as I let it dry between coats with light sanding with 600 grit paper it still would not accept any more color. Who knows, might be something that I did or maybe the wood!!! Oh well, it is just a shooter and not a show piece!! The rear of the stock in both pictures is really not as dark as it appears. Not sure what happened in the picture to make it appear that way.  
__________________
"This is the 44 Magnum AutoMag and holds a 300 grain cartridge and if properly used can remove the fingerprints"!! COTEP # CBOB0152
|
 |
| Thread Tools | |
| Display Modes | |
Hybrid Mode